量具量儀中英文對照匯總(很全，持續更新中)

　　1.刀口型直尺:knife straigjht edge

　　2.刀口尺: knife straigjht edge

　　3.三棱尺three edges straigjht edge

　　4.四棱尺four edges straigjht edge

　　5.條式和框式水平儀 bar form and square levels

　　6.合像水平儀 imaging level meter

　　7鑄鐵平板 cast iron surface plate

　　8.巖石平板 granite surface plate

　　9.鑄鐵平尺cast iron straigjht edge

　　10.鋼平尺和巖石平尺 steel and granite straigjht edge

　　11.圓度儀 roundness measuring instrument

　　12.電子水平儀electronic level meter

　　13.表面粗糙度比較樣塊鑄造表面 roughness comparison specimens cast surface

　　14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面

　　roughness comparison specimens-ground,turned,bored,milled,shape and planed

　　15.表面粗糙度比較樣塊電火花加工表面

　　roughness comparison specimens spark-erostion machining surfaces

　　16.表面粗糙度比較樣塊拋光加工表面

　　roughness comparison specimens pollshed surfaces

　　17.接觸式儀器的標稱特性

　　18.輪廓profiles

　　19.軌跡輪廓 traced profile

　　20.基準輪廓 reference profile

　　21.總輪廓 total profile

　　22.原始輪廓 primary profile

　　23.殘余輪廓residual profile

　　24.觸針式儀器stylus instrument

　　25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument

　　26.觸針式儀器的部件stylus instrument components

　　27.測量環measurement loop

　　28.導向基準renfence guide

　　29.驅動器drive unit

　　30.測頭(傳感器)probe(pick-up)

　　31.拾取單元tracing element

　　32.針尖stylus tip

　　33.轉換器transducer

　　34.放大器amplifier

　　35.模/數轉換器analog-to-digital converter

　　36.數據輸入data input

　　37.數據輸出data output

　　38.輪廓濾波和評定profile filtering and evaluation

　　39.輪廓記錄器profile recorder

　　40.儀器的計量特性metrological characteristics of the instrument

　　41.靜測力的變化change of static measuring force

　　42.靜態測力 static measuring force

　　43.動態測量力 dynamic measuring force

　　44.滯后hysteresis

　　45.測頭的測量范圍 transmission function for the sine waves

　　46.儀器的測量范圍measuring range of the instrument

　　47.模數轉換器的量化步距quantization step of the ADC

　　48.儀器分辨力 instrument resolution

　　49.量程分辨力比range-to-resolution ratio

　　50.測頭線性偏差probe linearity deviation

　　51.短波傳輸界限short-wave transmission limitation

　　52.輪廓垂直成分傳輸 vertical profile component transmission1

　　53表面粗糙度比較樣塊拋丸、噴砂加工表面

　　roughness comparison specimens shot blasted and blasted surfaces

　　54產品結構幾何量計術規范(GPS)geometrical product specifications(GPS)

　　55表面結構 surface texture

　　56接觸式儀器的標稱特性 nominal characteristics of contact instruments

　　57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth

　　58最大允許誤差 maximum permissible error

　　59圓柱直齒漸開線花鍵量規 gauges for straight cylindrical involute splines

　　60齒厚游標卡尺 Gear tooth vernier

　　calipers

　　61齒輪漸開線樣板the involute master of gear

　　62齒輪螺旋線樣板 the helix master of gear

　　63矩形花鍵量規 gauges for straight –sided splines

　　64測量蝸桿 master worm

　　65萬能測齒儀 universal gear measuring instrument

　　66萬能漸開線檢查儀universal involute measuring instrument

　　67齒輪齒距測量儀gear circular pictch measuring instrument

　　68萬能齒輪測量機 Universal gear measuring machine

　　69齒輪螺旋線測量儀gear helix measuring instrument

　　70便攜式齒輪齒距測量儀 manual gear circular pitch measuring instrument

　　71便攜式齒輪基節測量儀manual gear base pitch measuring instrument

　　72立式滾刀測量儀vertical hob measuring instrument

　　73齒輪雙面嚙合綜合測量儀Gear dual-flank measuring instrument

　　74齒輪單面嚙合整體誤差測量儀Gear single-flank meshing integrated error measuring instrument

　　75梯形螺紋量規 gauges for metric trapezoidal screw threads

　　76工作螺紋量規work gauges for metric trapezoidal screw threads

　　77校對螺紋量規check gauges for metric trapezoidal screw threads

　　78.梯形螺紋量規型式與尺寸 Types and dimensions of metric trapezoidal screw threads

　　79.普通螺紋量規型式與尺寸 Types and dimensions of gauges purpose screw threads

　　80.非螺紋密封的管螺紋量規 Gauges for pipe threads prcessure-tight joints are not made on the threads

　　81.螺紋千分尺Screw thread micrometer

　　82.最大允許誤差 maximum permissible error

　　83.間隙螺紋量規 Clearance screw gauge

　　84.量針Bar gauge

　　85.螺紋樣板 Screw thread template

　　86.用螺紋密封的管螺紋量規

　　Gauges for pipe threads where pressure-tight joints are made on the threads

　　87.刀具預調測量儀 精度Accuracy of the presetting instrument

　　88.薄膜式氣動量儀Membrane type pneumatic measuring instrument

　　89.光柵線位移測量系統Grating linear displacement measuring system

　　90.光柵角位移測量系統Grating angular displacement measuring system

　　91.磁柵線位移測量系統Magnet-grid linear displacement measuring system

　　92.量塊附件Accessories for gauge blocks

　　93.V形架Vee blocks

　　94.比較儀座Comparator stand

　　95.磁性表座Magnetic stand